Sabtu, 27 Mei 2017

MENGAPA MEMILIH POLYTRON pada kenderaan anda?

   

* Menghapuskan sehingga 95% daripada kehausan dalaman enjin.
* Mengurangkan suhu operasi enjin dan tahap kebisingan enjin.
* Menghapuskan enapan karbon bagi memastikan enjin benar-benar bersih.
* Sekiranya minyak atau kehilangan penyejuk (coolant), enjin dilindungi untuk
puluhan batu (maksimum 200Km) dalam sebarang bentuk pemanduan.
* Meningkatkan mampatan enjin.
* Menyumbang kepada pelepasan gas (karbon dioksida) yang lebih bersih.
* Prestasi enjin tidak merosot walaupun dalam operasi yang teruk ,berhabuk,
kotor dan dalam suhu lembap.
* Melanjutkan selang menukar minyak dan penapis minyak kepada 4 hingga 7
kali.
* Menyumbang kepada penjimatan bahan api yang agak efisien dan dan lebih
ekonomi. 8-15% (Securiforce G4S Statement- 2013)
* Pengurangan Sehingga 65% ke 70 % dalam kos penyelenggaraan.(Preventive
Maintenance) Securicor, Bomba Testimoni.
* Keputusan yang sangat memuaskan apabila digunakan dalam transmisi
(gearbox) manual dan automatik, power steering dan lain lain.

Hubungi agen-agen berhampiran anda yang SAH untuk mendapatkan produk
polytron.

Bermula pada hari ini, harga produk Polytron adalah seperti berikut:

Fully Sintetik 4 liter Motor : Rm 199.00
Semi Sintetik 4 liter 10w-40 : Rm 169.00
Fully Sintetik 1 liter Motor : Rm 62.50
Metal Treatment Concentrate (MTC) : Rm 143.00
Grease: 95.00
Spray : Rm 95.00

Harga tidak termasuk penghantaran samada COD dan Pos, Terima Kasih.


Selamat Datang Ke Blog Polytron Kedah

POLYTRON is state of the art line of lubricants that has been used for several years now in many industrial, racing and military applications.

Why are POLYTRON products superior to the other products on the market?
Conventional lubricants are based upon maintaining high strength and thickness of oil film, or on introducing an EP (Extreme Pressure) protective deposit between moving mating surfaces to resist failure resulting in scoring, seizure or accelerated wear.

When observing mating friction surfaces under high magnification one can see that they are actually full of "mountains" and "valleys" . These "mountains" penetrate the oil-film between the mating friction surfaces, and collide with each other.

These collisions in the micro level translates into "friction" in the macro-level. Some of these collisions result in metal particles breaking away from the colliding "mountains". The breaking away metal particles in the micro-level are what we see as "wear" process in the macro-level.


When POLYTRON is applied, under heat and pressure generated by friction, some of its elements impregnate metallurgically the crystal structure of the metal itself at its mating friction surfaces.

As a result of the metallurgical process, a very thin layer of the original metal is converted into a new significantly harder metal that has a wear-life at least 100 times longer than the original. This newly formed layer of metal protects the original "softer" metal beneath it from any wear.

Since the protective layer is very thin, it is as flexible as a very thin sheet metal. Although during collisions the protective layer does not allow metal particles to break away, its flexibility allows the metal underneath to be pushed horizontally by the horizontal force generated by collisions.

Thus the metal on the "mountains" is "pushed" into the "valleys" flattening out the friction surface, resulting in smooth polished-like surface that has a much lower friction coefficient.

This advanced technology that allows the original rough friction surfaces to be transformed into hard, smooth polished-like surfaces is one of the main characteristics that makes POLYTRON so different from other lubricants on the market today.